My Cart: 0 item(s)
Holding Force (Lbs.) (2) | 200 |
Note | Our units are tested on a load cell under a standardized test method which uses direct contact with a bare 1215 CRS ground strike plates that are .250� thick and are equal or greater than the face of the electromagnets. |
Voltage | 24 |
Current | DC |
Duty | Continuous |
Amps | 0.45 |
Quick Release | No |
Encapsulation | Yes |
Anti-Rotation Pin | No |
Mounting Option | Tapped Rear Threaded |
Bolt Desc. or Thread | Tapped 1/4-28 |
Mounting Screw Supplied (2) | NO |
Lead Wire Type (3) | PVC Hook Up Wire |
Lead Wire Ga. | 24 |
Lead Wire Length (in.) | 48" |
High Temperature (500 f) | No |
Magnetic Stainless (430FR) | No |
Height (in.) 3 | 1.38 |
Length (in.) | 4 |
Width (in.) | 1 |
Our EMPP Parallel Pole Rectangular electromagnets are only 1.0" wide and are useful in applications with uneven surfaces and have greater field reach than standard island configured units. These electromagnets are available 24 vdc online but also available in other voltages upon request. Check out our 24V Rectangular Electromagnet, capable of holding a weight of 250 lbs.
Weight | 2.00 pounds |
SKU | 6724 |