ELECTROMAGNETSSearching for a standard or custom electromagnet? Our standard round electromagnets are available in a wide range of sizes from .50" Dia. to 4.0" Dia. with a range of available operating voltages from 3 VDC to 230 VAC and holding forces from 2 lbs to 640 lbs. Our electromagnets are available in both encapsulated and non-encapsulate versions and available with several other options including a quick release option.
|RECTANGULAR & SQUARE ELECTROMAGNETSNew at APW is our line of Rectangular and square electromags. In production for many years we are now expanding our line by offerning these lines for commercial availability.From 2"x4"x3" holding 300 lbs to 1.5x1.5 Square holding 125 lbs and available voltages of 12 vdc to 115 vac.
COILS & CORESAPW Company has been producing superior hand wound tattoo machine coils since the late 1970's. From the early days APW had the pleasure of working with renowned East Coast artists and machine builders "Wally" Walter Moskowitz (S&W Tattoo) and "Big" Joe Kaplan (Kaplan East Coast Tattoo Supply).
|PICK AND PLACE
VACUUM PUMPThis vacuum pump is intended for use in conjunction with a small parts handling system. Parts can be handled without damage or contamination. Defects caused by pinching, scratching or marring can be eliminated. Critical surfaces are protected. Vacuum is turned on and off with the forefinger using an inline switch.
AND ASSEMBLIESSome of our products made over the years while not full product lines currently, can be found here. These products include solenoids, solenoid coils and replacement parts and or custom replacement coils that we have made for others over the years.
COIL WINDINGWe manufacture custom wound electrical coils to your specifications. Our coils are available with 16-50 gauge and half gauge magnet wire. Coils can be wound on supports and bobbins or made self-supporting. Various materials can be used to withstand high and low temperature requirements. Typically our size range is from .250" to 6.0"